Telecomanda cu invatare Alien CLR7945F3 engross

Poate fi folosita pentru 2 aparate, avand 2 locatii (A si B) pentru a memora 2 tipuri de telecomenzi.

Pasii pentru programare sunt descrisi mai jos:

Step 1Press buttons "A" and "Channel V" at the same time.Press both buttons for at least 5 seconds until the corresponding indicator A lights up.The learning system is on now.For programming source B press button "B" instead of button "A".

Step 2Hold the sending end of the established remote aiming at the receiving end of Alien remote (distance 2-5cm).

Step 3Press the button of Alien remote control which you want to program. The indicator will flash 3 times.

Step 4Press the targeted button of the original remote control.When receiving the correct data, LED will light for 1 second and then flash 3 times.

Step 5To learn other buttons repeat steps 3 + 4 until the end of all learning.

Step 6When learning is completed, press button "A" to exit learning state. If the learning system B is set at the first step, please press "B" to save and exit.